Hosa Flat Guitar Patch Cable - 1/4 Mono Right Angle - Male to Male

SKU
CFP-XXX
Right Angle | Shielded | 24 AWG | OFC | Keep Guitar Pedal Effects Neat & Organized

Hosa Flat Guitar Patch Cable - 1/4 Mono Right Angle - Male to Male

1/4 inch cables are typically used for analog signals, primarily audio. This cable is designed to interconnect electric guitar pedal effects. The all-metal right-angle plugs allow close spacing of pedal effects on pedal boards. Pro-audio cables are perfect for novice and professional musicians.

Features:

  • Nickel-plated plugs for rugged durability and efficient signal transfer
  • 24 AWG Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
  • OFC spiral shield for effective EMI and RFI rejection and flexibility
  • 90% OFC Spiral Shield

prop 65 warningWARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov

Write Your Own Review
You're reviewing:Hosa Flat Guitar Patch Cable - 1/4 Mono Right Angle - Male to Male
Your Rating

Q: What does TS mean? What is a TS connector used for?


A: TS is the abbreviation for “Tip Sleeve IN and refers to a specific type of 1/4″ connector that is set up for 2-conductor unbalanced operation. One insulator ring separates the tip and sleeve. The tip is generally considered the “hot IN or the carrier of the signal while the sleeve is where the ground or shield is connected. TS cables are best known as guitar or line-level instrument cables.


Q: What does TRS mean? What is a TRS connector used for?


A: TRS is the abbreviation for “Tip Ring Sleeve. IN It looks like a standard 1/4″ plug but with an extra “ring IN on its shaft. TRS cables have two conductors plus a ground (shield). TRS connectors are commonly used to connect balanced equipment or for running both left and right mono signals to stereo headphones.


Q: Why is a ¼ IN connector sometimes called a “phone plug IN?


A: The original 1⁄4 in (6.35 mm) version dates from 1878 when it was used for manual telephone exchanges making it possibly the oldest electrical connector standard still in use. It was used for years by telephone operators to patch telephone connections together.