Blog

This is the 1-lb Solder Spool The solder is approximately 1-lb and is strung around a convenient use spool. This solder is composed of 60% tin and 40% lead which allows it to melt at a lower Temperature. It creates a rounded bead of solder. This solder is designed for general electronic use. The 1-lb Solder Spool is the base for any of your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Female Dust Cap with chain. It features a BNC Female connector on one end, and ball bearing chain on the other. The cap and chain are made with a nickel-plated, metal construction for maximum strength and durability. The cap will allow you to prevent any dust, water, or moisture from being seeped in. That could cause interference, or power loss. The BNC Female dust Cap with chain is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Male Terminator 75 Ohms It features a BNC male connector on one end, and terminator on the other. The terminator is made with a nickel-plated, metal construction for maximum signal strength and durability. The terminator will allow you to prevent an RF signal from being reflected back from each end, causing interference, or power loss. The BNC Male Terminator 75 Ohm is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Male Terminator 93 Ohms It features a BNC male connector on one end, and terminator on the other. The terminator is made with a nickel-plated, metal construction for maximum signal strength and durability. The terminator will allow you to prevent an RF signal from being reflected back from each end, causing interference, or power loss. The BNC Male Terminator 93 Ohm is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Male Terminator with Grounding Chain - 75 Ohms It features a BNC male connector on one end, and terminator with grounding chain on the other. The terminator and chain is made with a nickel-plated, metal construction for maximum signal strength and durability. The terminator will allow you to prevent an RF signal from being reflected back from each end, causing interference, or power loss. The BNC Male Terminator with Grounding Chain - 75 Ohms a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Male Terminator with Grounding Chain - 50 Ohms It features a BNC male connector on one end, and terminator with grounding chain on the other. The terminator and chain is made with a nickel-plated, metal construction for maximum signal strength and durability. The terminator will allow you to prevent an RF signal from being reflected back from each end, causing interference, or power loss. The BNC Male Terminator with Grounding Chain - 50 Ohms a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC Male Terminator 50 Ohms It features a BNC male connector on one end, and terminator on the other. The terminator is made with a nickel-plated, metal construction for maximum signal strength and durability. The terminator will allow you to prevent an RF signal from being reflected back from each end, causing interference, or power loss. The BNC Male Terminator 50 Ohm is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the BNC 20 AWG Center Pin - 10 Pack The BNC 20 AWG Center Pin - 10 pack consists of 10 BNC 20 AWG Center Pins. Each Pin is gold plated and made for BNC Crimp/Solder pin for 20 AWG Coaxial Cables. The BNC 20 AWG Center Pin - 10 Pack is a quick and easy solution for all your cable and connector needs. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

Are you looking for a quick and easy DIY installation or repair for your coax cable? Our 3 piece BNC Male connectors for Mini RG59 will provide a simple solution for your wiring needs. For this installation you will need: A coax stripper, coax cable, a soldering iron, a crimp tool, and the BNC connector. The 3 piece connector consists of the connector housing, the pin, and the ferrule. Keep in mind, you will want to make sure that your coax stripper, crimp tool, and BNC connector match the coax cable that you are installing. Start by inserting the ferrule over the outer jacket of the cable. Then, using your cable stripper, strip back the outer jacket and dielectric. The advantage of using a cable stripper is that it will strip back the jacket and dielectric at the same time. Pull back the braided shield and Insert the pin onto the center conductor. Solder the pin onto the center conductor and insert the connector housing over the cable. Apply pressure and twist to make sure that connector fits into place. Then, slide up the ferrule to the base of the connector, folding the shield with it. Crimp the ferrule onto the outer jacket to complete termination. Give the connector a small tug to make sure it is properly seated. Congratulations, you have successfully installed the 3 piece BNC connector. For all of your cable and connector needs, choose Show Me Cables

Are you looking for a quick and easy DIY installation or repair for your coax cable? Our 3 piece BNC Male connectors for RG59 & RG62 Plenum will provide a simple solution for your wiring needs. For this installation you will need: A coax stripper, coax cable, a soldering iron, a crimp tool, and the BNC connector. The 3 piece connector consists of the connector housing, the pin, and the ferrule. Keep in mind, you will want to make sure that your coax stripper, crimp tool, and BNC connector match the coax cable that you are installing. Start by inserting the ferrule over the outer jacket of the cable. Then, using your cable stripper, strip back the outer jacket and dielectric. The advantage of using a cable stripper is that it will strip back the jacket and dielectric at the same time. Pull back the braided shield and Insert the pin onto the center conductor. Solder the pin onto the center conductor and insert the connector housing over the cable. Apply pressure and twist to make sure that connector fits into place. Then, slide up the ferrule to the base of the connector, folding the shield with it. Crimp the ferrule onto the outer jacket to complete termination. Give the connector a small tug to make sure it is properly seated. Congratulations, you have successfully installed the 3 piece BNC connector. For all of your cable and connector needs, choose Show Me Cables