Blog

Have you recently purchased a new sound bar or receiver? If you have, you may have noticed that many newer audio equipment will have a digital audio input that won’t work with your existing analog audio system. Our analog to digital audio converter will allow you to play audio from your current equipment with your new receiver. Simply connect a dual RCA cable from the source device into the converter. Then connect either a digital coax or digital optical cable from the converter into your receiver. And there you have it, analog audio ready to transmit through your digital receiver. Be aware, this converter is not bi-directional and is only designed to be used from an analog output to a digital input. If you need a digital to analog converter, this HDMI to RCA converter is what you will need. Our RCA Stereo Audio to Digital converter will provide a quick and easy solution for connecting your audio equipment. For all of your home theater needs, choose Show Me Cables

Have you ever wanted to connect from your laptop or media player to an older projector or monitor? With our HDMI to VGA converter, you can send your HDMI signal to your older equipment in a matter of moments. HDMI is a high definition audio/video signal found on many newer media devices, however, VGA, which is still commonly found on many monitors and projectors, is an analog signal and you will need to use a converter to connect between them. Simply connect an HDMI cable from your source device into the converter. Then use a VGA cable to connect from the converter to your display. The converter requires no additional drivers or software and is a simple plug and play solution. The converter features a 3.5mm audio port for sending your audio from the converter to your device if it is needed. Most devices will not require additional power, however, if your HDMI port is not powered, there is an additional power supply available: http://www.showmecables.com/product/4... Be aware, the converter is not bi-directional and will only work from connecting an HDMI source to a VGA display. If you need a VGA source to an HDMI display, you will need this converter here: http://www.showmecables.com/product/V... If you need a quick and easy solution for connecting your displays, our HDMI to VGA converter will provide you with everything you will need. For all of your converter and adapter needs, choose Show Me Cables

Hi, I’m Kyle from ShowMeCables. ShowMeCables is a distributor of ECore Cables DuroRacks. ECore DuroRacks are an entire product family of racks, enclosures and accessories. The ECore DuroRacks provide maximum features without maximizing your budget. This is the ECore Vented Rackshelf. It is available in 1, 2 and 3 RU. If you need an economical and easy way to organize your data equipment; our 2 space Rackshelf will provide you with plenty of room for your project It features a fully ventilated bottom panel for optimal heat dissipation. Our 2 space vented rackshelf is 15 inches deep and can hold up to 37 lbs. It has a standard 19 inch width that can accommodate a usable width of 17.2 inches. Our shelf is easy to install and includes standard 10-32 rack screws and washers to mount onto your rack. Save space and time by using our 2 RU vented rackshelf and install in minutes. For all of your racks, enclosures and accessories, choose Show Me Cables.

Hi, I’m Kyle from ShowMeCables. ShowMeCables is a distributor of ECore Cables DuroRacks. ECore DuroRacks are an entire product family of racks, enclosures and accessories. The ECore DuroRacks provide maximum features without maximizing your budget. This is the ECore Vented Rackshelf. It is available in 1, 2 and 3 RU. If you need an economical and easy way to organize your data equipment; our 1 space Rackshelf will provide you with plenty of room for your project It features a fully ventilated bottom panel for optimal heat dissipation. Our 1 space vented rackshelf is 10.5 inches deep and can hold up to 15 lbs. It has a standard 19 inch width that can accommodate a usable width of 17.2 inches. Our shelf is easy to install and includes standard 10-32 rack screws and washers to mount onto your rack. Save space and time by using our 1 RU vented rackshelf and install in minutes. For all of your racks, enclosures and accessories, choose Show Me Cables.

Hi, I’m Kyle from ShowMeCables. ShowMeCables is a distributor of ECore Cables DuroRacks. ECore DuroRacks are an entire product family of racks, enclosures and accessories. The ECore DuroRacks provide maximum features without maximizing your budget. This is the ECore 2 Space Double Sided Rackshelf. Perfect for supporting larger and heavier equipment for your data rack. If you need an economical and easy way to organize your data equipment; our double sided rackshelf will provide you with plenty of room for your project The rackshelf is 18 inches deep and can hold up to 101 lbs. It has a standard 19 inch width that can be used with distribution racks and cabinets with 3 inch deep side rails Our easy to install, center mounted shelf, includes standard 10-32 rack screws and washers to mount onto your rack. Save space and time by using our 2 RU double sided rackshelf and install in minutes. For all of your racks, enclosures and accessories, choose Show Me Cables.

Hi, I’m Kyle from ShowMeCables. ShowMeCables is a distributor of ECore Cables DuroRacks. ECore DuroRacks are an entire product family of racks, enclosures and accessories. The ECore DuroRacks provide maximum features without maximizing your budget. This is the ECore Vented Rackshelf. It is available in 1, 2 and 3 RU. If you need an economical and easy way to organize your data equipment; our 3 space Rackshelf will provide you with plenty of room for your project It features a fully ventilated bottom panel for optimal heat dissipation. Our 3 space vented rackshelf is 15 inches deep and can hold up to 44 lbs. It has a standard 19 inch width that can accommodate a usable width of 17.2 inches. Our shelf is easy to install and includes standard 10-32 rack screws and washers to mount onto your rack. Save space and time by using our 3 RU vented rackshelf and install in minutes. For all of your racks, enclosures and accessories, choose Show Me Cables.

Hi, I’m Kyle from ShowMeCables. ShowMeCables is a distributor of ECore Cables DuroRacks. ECore DuroRacks are an entire product family of racks, enclosures and accessories. The ECore DuroRacks provide maximum features without maximizing your budget. This is the ECore Utility Rackshelf. It is available in 1, 2 and 3 RU. If you need an economical and easy way to organize your data equipment; our 2 space Rackshelf will provide you with plenty of room for your project It features a solid constructed cold rolled steel for optimal durability and a black powder coat finish that will not rust or scratch. Our 2 space utility rackshelf is 15 inches deep and can hold up to 44 lbs. It has a standard 19 inch width that can accommodate a usable width of 17.2 inches. Our shelf is easy to install and includes standard 10-32 rack screws and washers to mount onto your rack. Save space and time by using our 2 RU utility rackshelf and install in minutes. For all of your racks, enclosures and accessories, choose Show Me Cables.

Do you need to route your cable throughout your home or office? Our pre-terminated 66 wiring block will provide you with a clean and professional solution for your wiring needs. A 66 block will accept an incoming phone or data line from your service provider and allow you to route the connections to wherever they are needed A wiring block will have 4 columns. To understand how the routing will work, let’s take a look at a single row. On this row there are 4 contacts. Contact 1 and 2 are for the incoming line and contacts 3 and 4 are for the outgoing line. Contact 1 is wired directly to Contact 2 and contact 3 is connected directly to contact 4. So the question is, how do we make them talk to each other? For this example, we’ll do a simple 1 pair connection. You will take the incoming line and punch down into contact 1. You will then take your outgoing line and punch down into contact 4 in the same color code. Now both our incoming line and outgoing line are connected, now we just need to connect them to each other. If both lines are wired directly across from each other, you can simply use a bridging clip to pair the connection from contact 2 to contact 3. If your incoming and outgoing lines do not match or if you just need to change your wiring setup over time, you can use cross connect wire to punch down from contact 2 of your incoming line to contact 3 of the outgoing. The pre-terminated block has the and incoming and outgoing lines already punched down and terminated into 12 RJ45 jacks. You will simply take an RJ45 cable from your service line into the block, then use bridge clips or cross connect as needed to pair your connections, and finally connect an RJ12 modem cable from the block into your output line. Our 66 wiring block is made with a durable and high impact, flame retardant material. And can accept between 22-26 gauge wire. It includes the wall mou

Do you need to route your cable throughout your home or office? Our pre-terminated 66 wiring block will provide you with a clean and professional solution for your wiring needs. A 66 block will accept an incoming phone or data line from your service provider and allow you to route the connections to wherever they are needed A wiring block will have 4 columns. To understand how the routing will work, let’s take a look at a single row. On this row there are 4 contacts. Contact 1 and 2 are for the incoming line and contacts 3 and 4 are for the outgoing line. Contact 1 is wired directly to Contact 2 and contact 3 is connected directly to contact 4. So the question is, how do we make them talk to each other? For this example, we’ll do a simple 1 pair connection. You will take the incoming line and punch down into contact 1. You will then take your outgoing line and punch down into contact 4 in the same color code. Now both our incoming line and outgoing line are connected, now we just need to connect them to each other. If both lines are wired directly across from each other, you can simply use a bridging clip to pair the connection from contact 2 to contact 3. If your incoming and outgoing lines do not match or if you just need to change your wiring setup over time, you can use cross connect wire to punch down from contact 2 of your incoming line to contact 3 of the outgoing. The pre-terminated block has the and outgoing lines already punched down and terminated into 12 RJ11 jacks. You will simply need to punch down your incoming service line, then use bridge clips or cross connect as needed, and finally connect a simple RJ11 cable from the block into your output line. Our 66 wiring block is made with a durable and high impact, flame retardant material. It is rated for and exceeds Cat5e standards and accepts between 22-26 gauge wire. It includes the wall mount bracket and hinged cover for easy installation and security. For RJ11 con

Do you need to route your cable throughout your home or office? Our pre-terminated 66 wiring block will provide you with a clean and professional solution for your wiring needs. A 66 block will accept an incoming phone or data line from your service provider and allow you to route the connections to wherever they are needed A wiring block will have 4 columns. To understand how the routing will work, let’s take a look at a single row. On this row there are 4 contacts. Contact 1 and 2 are for the incoming line and contacts 3 and 4 are for the outgoing line. Contact 1 is wired directly to Contact 2 and contact 3 is connected directly to contact 4. So the question is, how do we make them talk to each other? For this example, we’ll do a simple 1 pair connection. You will take the incoming line and punch down into contact 1. You will then take your outgoing line and punch down into contact 4 in the same color code. Now both our incoming line and outgoing line are connected, now we just need to connect them to each other. If both lines are wired directly across from each other, you can simply use a bridging clip to pair the connection from contact 2 to contact 3. If your incoming and outgoing lines do not match or if you just need to change your wiring setup over time, you can use cross connect wire to punch down from contact 2 of your incoming line to contact 3 of the outgoing. The pre-terminated block has the and outgoing lines already punched down and terminated into 8 RJ12 jacks. You will simply need to punch down your incoming service line, then use bridge clips or cross connect as needed, and finally connect a simple RJ12 modem cable from the block into your output line. Our 66 wiring block is made with a durable and high impact, flame retardant material. It is rated for and exceeds Cat5e standards and accepts between 22-26 gauge wire. It includes the wall mount bra