Are you looking for a quick and easy DIY installation or repair for your coax cable? Our BNC Right Angle Twist On connectors for RG59 & RG62 Plenum will provide a simple solution for your wiring needs. Because this is a twist on connector, it is only one single piece. This makes installation easy by limiting the number of small pieces to keep track of and speeding up termination. For this installation you will need: a coax stripper, coax cable, and the twist on connector. Keep in mind, you will want to make sure that your coax stripper and connector match the cable that you are installing. Using your cable stripper, strip back the outer jacket and dielectric. The advantage of using a cable stripper is that it will strip back the jacket and dielectric at the same time. Fold back the braided shield and insert the connector housing onto the cable. You will need to apply a bit of pressure and twist to make termination onto the cable jacket. By twisting and pushing the connector, the center conductor is able to make contact with the center pin and the connector is able to tighten onto the outside jacket. Congratulations, you have successfully installed the BNC twist on connector. For all of your cable and connector needs, choose Show Me Cables

BNC Right Angle Male Twist-On Connector - RG59 & RG62 Plenum