Are you looking for a quick and easy installation or repair for your coax cable? Our N Male Crimp Connector for LMR-200 is an easy to use, 3-piece design for terminating your cable. The 3 piece connector consists of the connector housing, a ferrule, and the male pin. For this installation you will need: LMR-200 cable, a strip tool, a crimp tool, and the crimp connector. Start inserting the ferrule over the jacket. Then use the strip tool to get rid of the excess jacket and dielectric in one smooth motion. Pull back the braided shield. Crimp the male pin onto the center conductor. Then place the connector onto the cable and pull the ferrule up to the base of the connector, folding the shield with it. Then, use the crimp tool to terminate the ferrule onto the jacket. For all of your cable and connector needs, choose Show Me Cables