Are you looking for a quick and easy installation or repair for your coax cable? Our Holland F-Type Compression Connectors for RG11 Quad Shield will provide a simple solution for your wiring needs. The connectors consists of the connector housing, pin and guide. For this installation you will need: A strip tool, coax cable, a compression tool, and the compression connector. Keep in mind, you will want to make sure your coax stripper, compression tool and connector match the cable that you are installing. Strip back the outer jacket and dielectric using the strip tool. The advantage of using a coax stripper is that it will strip back both the jacket and dielectric at the same time. Fold back the braided shield and insert the pin onto the center conductor. Then slide the guide onto the pin. Insert the connector housing. Apply pressure and twist to make sure the center conductor is able to reach the end of the connector housing. Insert the connector into the compression tool and firmly squeeze in order to make termination. This will compress the connector, securing it to the cable jacket. Congratulations, you have successfully installed the F-type connector. For all of your cable and connector needs, choose Show Me Cables.

Holland SLC-11Q F-Type Male Compression Connector - RG11 Quad