Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Ultra Slim TV Wall Mount can accommodate 15-32 inch TV's up to 53 pounds. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a drill with a quarter inch bit, a stud finder, a pencil, and a screwdriver. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting plate onto the back of the TV, lining up the mounting holes. Then, begin to install the arms, using the screwdriver. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Drill the first pilot hole and position the plate on the wall. Then install the first mounting screw. Using a level find the proper position for the secondary mounting screw and mark with a pencil. Drill your secondary pilot hole at the bottom of the bracket and install the second mounting screw. The bracket is able to maintain full security with the two mounting screws. However, if additional security is preferred, you are able to use drywall anchors for the remaining two points. Now you are ready to mount the TV. Slide the mounting plate onto the mounting bracket to complete installation. Congratulations, you have successfully installed the Full Motion Articulating Wall Mount.