Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Full Motion Articulating TV Wall Mount can accommodate 10-23 inch TV's, up to 33 pounds, and features an 8 inch swing arm. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a phillips head screwdriver, a pencil, a stud finder, a drill with a quarter inch bit, and a level. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting arm onto the back of the TV, lining up the mounting holes. Then, using the included screws, begin to install the arm using your screwdriver. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Drill a pilot hole, using the drill, and place the bracket onto the wall. Insert the mounting screw and install using your screwdriver or drill. Drill your secondary pilot hole at the bottom of the bracket and install the second mounting screw. Now you are ready to mount the TV. Slide the mounting arm onto the bracket and tighten the tension bolt to lock them together. Adjust the TV to proper distance and balance with a level. Congratulations, you have successfully installed the Full Motion Articulating TV Wall Mount.