Do you need to quickly connect lines on your wiring block? Our 66 Wiring Block bridge clips will provide a simple solution for connecting and routing your data lines. A wiring block will have 4 columns. To understand how the routing will work, let’s take a look at a single row. On this row there are 4 contacts. Contact 1 and 2 are for the incoming line and contacts 3 and 4 are for the outgoing line. Contact 1 is wired directly to Contact 2 and contact 3 is connected directly to contact 4. So the question is, how do we make them talk to each other? For this example, we’ll do a simple 1 pair connection. You will take the incoming line and punch down into contact 1. You will then take your outgoing line and punch down into contact 4 in the same color code. Now both our incoming line and outgoing line are connected, now we just need to connect them to each other. If both lines are wired directly across from each other, you can simply use a bridging clip to pair the connection from contact 2 to contact 3. The bridge clips are a small ½ inch metal strip, forming a U shape, to allow quick and easy installation on the wiring terminals. For all of your cable and accessory needs, choose Show Me Cables