Are you looking for a quick and easy DIY installation or repair for your coax cable? Our 2 piece BNC Male connectors for RG59 & RG62 will provide a simple solution for your wiring needs. Because this is a 2 piece connector, the pin is pre-installed to the connector housing. The only other piece to the connector is the crimp ferrule. For this installation you will need: A coax stripper, coax cable, a crimp tool, and the BNC connector. Keep in mind, you will want to make sure that your coax stripper, crimp tool, and BNC connector match the coax cable that you are installing. Start by inserting the ferrule over the outer jacket of the cable. Then, using your cable stripper, strip back the outer jacket and dielectric. The advantage of using a cable stripper is that it will strip back the jacket and dielectric at the same time. Pull back the braided shield and Insert the connector onto the cable. Apply pressure and twist to make sure that the center conductor makes contact with the center pin. Then, slide up the ferrule to the base of the connector, folding the shield with it. Crimp the ferrule onto the outer jacket to complete termination. Give the connector a small tug to make sure it is properly seated. Congratulations, you have successfully installed the 2 piece BNC connector. For all of your cable and connector needs, choose Show Me Cables

BNC Male Crimp Connector - RG59 & RG62 PVC