Wall Plate

This is the ICC 10GB High Density Adapter Panel - LC Quad - 12 Duplex - Metal With this stainless steel ICC Adapter Panel, you can easily make your mount enclosure unit support your fiber applications. With its push pin technology, installation is a breeze. Just line up the holes and push! This panel includes 12 pre-loaded duplex adapters, and fits all ICC fiber enclosures. The ICC adapter supports 62.5/125 and 50/125 micron fiber cables, but works with 10GB multimode configurations. For more information on our product please contact our customer service department at 888-519-9505 For all your cable and connector needs choose Show Me Cables.

This is the ICC Fiber Adapter Panel - SC - 6 - Port Duplex With this stainless steel ICC Adapter Panel, you can easily make your mount enclosure unit support your fiber applications. With its push pin technology, installation is a breeze. Just line up the holes and push! This panel includes 6 pre-loaded duplex adapters, and fits all ICC fiber enclosures. The ICC adapter supports 62.5/125 and 50/125 micron fiber cables, but works with multimode configurations only. For more information on our product please contact our customer service department at 888-519-9505 For all your cable and connector needs choose Show Me Cables.

This is 100 Watt Sliding Impedance Matching Volume Control Our multi-room volume control is an easy to use controller for up to 16 pairs of speakers. Rated for 100 watts per channel, it delivers high quality and is a great value for whole home audio or classroom a/v. It offers 12 steps of attenuation from all the way off in the counterclockwise position to all the way on. Selectable impedance matching volume controls ensure that the impedance load shown to the receiver or amplifier never goes below the rated capabilities. It supports 1x, 2x, 4x and 8x settings. Solderless terminations make it easy for the pro or home-user to install. It supports up to 14 gauge speaker wire. Each volume control comes with three matching knobs, inserts and plates - ivory, white and almond. This allows you to easily match any installation color scheme. This solderless impedance matching volume control supports up to 100 watts per channel. The 100 Watt Sliding Impedance Matching Volume Control is a fantastic solution for your audio needs. For more information on our products please contact our customer service department at 888-519-9505 For all your cable and connector needs choose Show Me Cables.

Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Ultra Slim TV Wall Mount can accommodate 25-42 inch TV's up to 88 pounds and can support a tilt up to 30 degrees. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a drill with a quarter inch bit, a stud finder, a pencil, a screwdriver, a level, and a half inch socket with a drill attachment or a wrench. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting arm onto the back of the TV, lining up the mounting holes. Then, begin to install the arms, using the screwdriver. Repeat this process for the other mounting arm. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Then find the next nearest stud and mark that position as well. Drill the first pilot hole and position the plate on the wall. Then install the first mounting screw. Using a level find the proper position for the secondary mounting screw and mark with a pencil. Drill another pilot hole and install the second mounting screw. Drill the remaining pilot holes and install the final mounting screws. Now you are ready to mount the TV. Mount the TV onto the wall, making sure that the hooks of the arm securely grab the mounting plate. Tighten the safety screws on the bottom of the bracket from underneath the television. If needed, adjust the tension knobs to the desired tilt position. Congratulations, you have successfully installed the Ultra Slim TV Wall Mount Bracket.

Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Ultra Slim TV Wall Mount can accommodate 32-65 inch TV's up to 110 pounds. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a drill with a quarter inch bit, a stud finder, a pencil, a screwdriver, and a half inch socket with a drill attachment or a wrench. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting arm onto the back of the TV, lining up the mounting holes. Then, begin to install the arms, using the screwdriver. Repeat this process for the other mounting arm. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Then find the next nearest stud and mark that position as well. Drill the first pilot hole and position the plate on the wall. Then install the first mounting screw. Using a level find the proper position for the secondary mounting screw and mark with a pencil. Drill another pilot hole and install the second mounting screw. Drill the remaining pilot holes and install the final mounting screws. Now you are ready to mount the TV. Mount the TV onto the wall, making sure that the hooks of the arm securely grab the mounting plate. The mounting arms feature release tabs for easy disconnect if the TV needs to be moved. Congratulations, you have successfully installed the Ultra Slim TV Wall Mount Bracket.

Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Ultra Slim TV Wall Mount can accommodate 15-32 inch TV's up to 53 pounds. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a drill with a quarter inch bit, a stud finder, a pencil, and a screwdriver. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting plate onto the back of the TV, lining up the mounting holes. Then, begin to install the arms, using the screwdriver. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Drill the first pilot hole and position the plate on the wall. Then install the first mounting screw. Using a level find the proper position for the secondary mounting screw and mark with a pencil. Drill your secondary pilot hole at the bottom of the bracket and install the second mounting screw. The bracket is able to maintain full security with the two mounting screws. However, if additional security is preferred, you are able to use drywall anchors for the remaining two points. Now you are ready to mount the TV. Slide the mounting plate onto the mounting bracket to complete installation. Congratulations, you have successfully installed the Full Motion Articulating Wall Mount.

Have you recently purchased a new TV and need a way to mount it? Our Ecore line of TV brackets will be the perfect solution for your home theater needs. The Full Motion Articulating TV Wall Mount can accommodate 10-23 inch TV's, up to 33 pounds, and features an 8 inch swing arm. Included with the bracket is all the hardware you need to install the TV wall mount bracket. The tools needed for this installation are: a phillips head screwdriver, a pencil, a stud finder, a drill with a quarter inch bit, and a level. Locate the mounting points on the back of your TV. The bracket includes a set of universal screws that should fit most standard TV's and monitors. Lay the mounting arm onto the back of the TV, lining up the mounting holes. Then, using the included screws, begin to install the arm using your screwdriver. Using a stud finder, locate a stud to install the mounting bracket and mark the stud using your pencil. Drill a pilot hole, using the drill, and place the bracket onto the wall. Insert the mounting screw and install using your screwdriver or drill. Drill your secondary pilot hole at the bottom of the bracket and install the second mounting screw. Now you are ready to mount the TV. Slide the mounting arm onto the bracket and tighten the tension bolt to lock them together. Adjust the TV to proper distance and balance with a level. Congratulations, you have successfully installed the Full Motion Articulating TV Wall Mount.

This is the Single Gang Binding Post Decora Wall Plate in White The wall plate features a pre-installed decora style insert with two gold plated binding post jacks. The binding posts can be used with bare cable by inserting the speaker wire in the small opening beneath the head and then screwing it back down. Or if you have banana plugs already installed on your speaker wire, you can simply plug them into the posts. The wall plate is easy to install and makes for a nice, clean, professional appearance. The Single Gang Binding Post Decora Wall Plate will simplify your home theater setup and provide crisp audio fidelity.

This is the Single Gang Binding Post Decora Wall Plate in White The wall plate features a pre-installed decora style insert with two gold plated binding post jacks. The binding posts can be used with bare cable by inserting the speaker wire in the small opening beneath the head and then screwing it back down. Or if you have banana plugs already installed on your speaker wire, you can simply plug them into the posts. The wall plate is easy to install and makes for a nice, clean, professional appearance. The Single Gang Binding Post Decora Wall Plate will simplify your home theater setup and provide crisp audio fidelity. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables