Monthly Archives: September 2017

This is the 2 way VGA video splitter and extender. It features a DC jack and 3 female VGA ports, one input and two outputs, on the back. As well as an included power supply. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. The splitter can support resolutions up to 2048x1536 up to 180 FT. The 2 way VGA video splitter and extender is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

The Neat Patch is a new tool for rack mounted horizontal cable management. It’s innovative approach will save you time and money and will make your installs look professional with very little effort. Most horizontal cable managers amount to little more than finger duct. These allow you to route cables along the front or rear of your rack, but fail to take advantage of the interior rack space, which can leave you with dangling cables if you don’t have exact lengths. Excess cable can waste time and money. And will make your rack installs look messy. The Neat Patch is designed to be used with almost any length of cable. Excess cabling can be stored in the ventilated storage compartment. And only what you need remains visible. 1 foot patch cables are often too short to connect, especially across a 19 inch wide rack. And longer cables will dangle. The Neat Patch combines traditional cable management and storage space with the use of 2 foot patch cables. Which allows you enough length to patch across the width of your rack while maintaining proper bend radius and minimizing cable costs. The Neat Patch occupies two rack units and can be placed between 24 or 48 port patch panels or switches. Install onto your rack as you would any 2 unit panel. Your 2 foot cable should be looped and connected to your desired ports with the lines running through your duct and the excess stored in the organizer. The Neat Patch can neatly organize up to 48 patches. We also offer kits, which include 24 or 48 2 foot Cat6 cables. The unit comes in black and we offer 10 different colors of cable. Now let’s take a look at how the Neat Patch is constructed. The Neat Patch enclosure is constructed of hard, nonconducting molded plastic with fixed finger duct for routing your cables. And a sliding front cover for easy access. The spacious, vented compartment also features 4 rear entry grommets which pop out to better suit your needs.

This is the AC to DC Power Supply. It features an AC power supply on one side. And a 2.1mm ID/5.5mm OD DC Plug on the other side. The adapter is rated for 1 amps at 18 volts. The adapter will allow you to operate your device or charge the battery from electrical power outlets. The AC to DC Power Supply is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 2 way HDMI splitter. It features a DC jack and 3 HDMI female ports, one input and two outputs on one side. And a 3.5mm jack, LED indicators, and a reset button on the other side. As well as an included power supply. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. The splitter can support 3D and 4k video up to a length of 60 FT and offers IR control for maximum functionality. Allowing you to control your equipment from anywhere you have an IR target set up, adding the most convenience out of using your splitter. The 2 way HDMI splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 4 way HDMI splitter. It features a DC jack and 5 HDMI female ports, one input and four outputs on one side. And a 3.5mm jack, LED indicators, and a reset button on the other side. It also includes a power supply and an IR target, emitter, and adapter. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. The splitter can support 3D and 4k video up to a length of 60 FT and offers IR control for maximum functionality. Allowing you to control your equipment from anywhere you have an IR target set up, adding the most convenience out of using your splitter. The 4 way HDMI splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 8 way HDMI splitter. It features a DC jack and 9 HDMI female ports, one input and eight outputs, on one side. And a 3.5mm jack, EDID controls, a micro USB port, LED indicators, a reset button and a power switch on the other side. It also includes a power supply and an IR target, emitter, and adapter. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. The splitter can support 3D and 4k video up to a length of 60 FT and offers IR control for maximum functionality. Allowing you to control your equipment from anywhere you have an IR target set up, adding the most convenience out of using your splitter. The splitter supports EDID, which allows for better communication between your source device and your display, resulting in the best possible image quality. The 8 way HDMI splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the Nema 5-20 Female to 5-15 Male Power Adapter. It features a Nema 5-20 Female connector on one side. And a Nema 5-15 Male connector on the other side. The adapter is rated for 15 amps and at 125 volts. The adapter will allow you to connect a Nema 5-20 cable, frequently found on more heavy duty equipment like household appliances, into a standard 5-15 outlet. It is important to note, however, you should not exceed the voltage or amperage of the adapter. Please make sure to check the details of your equipment before use. The Nema 5-20 Female to 5-15 Male Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the AC Male to Female Power Adapter. It features a 3 prong Nema 5-15 Female connector on one side. And a 1-15 Male connector on the other side. The adapter is rated for 15 amps at 120 volts. The adapter will allow you to connect your newer 3 prong cables from your equipment to an older, ungrounded 2 prong outlet. Be aware: in order to ensure the connection is grounded. You will need to have a ground wire connected from your electrical plate to the mounting tab on the adapter. The AC Male to Female Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the C14 to Nema 5-15 Power Adapter. It features an IEC C14 connector on one side. And a Nema 5-15 Female connector on the other side. The adapter is rated for 10 amps at 240 volts. The adapter will allow you to change a Nema 5-15 cable into a C14 cable. The C14 to Nema 5-15 Female Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the C14 to C7 Power Adapter. It features a C14 connector on one side. And a C7 connector on the other side. The adapter is rated for 10 amps at 240 volts. The adapter will allow you to change a C13 cable into a C7 cable The C14 to C7 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.