Monthly Archives: September 2017

This is the Ecore DuroRacks Fixed Wall Mount Cabinet. The cabinet ships unassembled in a small, flat box to save you the trouble of added shipping costs. And today we’re going to show you how to install it. We’ll be installing the 9RU version, but all the same methods will apply for both the 6RU and 15RU versions. Out of the box, the you’ll find the following hardware included: a rear wall mount panel, 4 rack rails, 2 side panels with removable doors, front door, top panel with included fan, a bottom panel, cage nuts, washers, screws, and 2 sets of keys, one for the door and one for the side panels. Because of the many different conditions that the cabinet may be installed, we will not be going over the installation of the back panel. Ensure that you use the recommended tools and hardware needed to support the weight of the cabinet and equipment based on your location. Start by unlocking the doors on the side panels and removing them. Then, remove the front door from the front panel by squeezing the hinge locks, making sure to hold on to the small plastic spacer Insert the washers into position on the screws. Now it’s time to install the cage nuts. Let’s start with the side panels by placing a cage nut into each port at all four corners. As well as the two front facing ports. Repeat this step for the other side panel. When you’re finished, each corner should look like this. Install four more cage nuts into the ports on the back panel. Next, we’ll attach the rack rails using the rack screws onto the side panels. Align the rack rails to the side panel so that the screw holes match up to the cage nuts. Then tighten the screws using a screwdriver. Do this for all four sides. And repeat for the other side panel and rack rails. Line up the side panel with the cage nuts on the back panel and tighten both screws. Repeat this step for the other side panel. Install the top panel by sliding the rear tab underneath the lip of the ba

This is the C13 to Nema 5-15 Power Adapter. It features a C13 connector on one side. And a Nema 5-15 Male connector on the other side. The adapter is rated for 15 amps at 120 volts. The adapter will allow you to change a C14 cable into a Nema 5-15 cable. The C13 to Nema 5-15 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the C13 to Nema 5-15 Power Adapter. It features a C13 connector on one side. And a Nema 5-15 Male connector on the other side. The adapter is rated for 15 amps at 120 volts. The adapter will allow you to change a C14 cable into a Nema 5-15 cable. The C13 to Nema 5-15 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 2 way compact HDMI splitter. It features an HDMI male connector on one side. And two HDMI female connectors on the other side. It also features a 3.5mm and micro USB port. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. The splitter is 8 inches in length and does not require any external power. Because of this, there is a distance limitation of 12 FT to be kept in mind. The splitter is HDCP compliant and can support full 4k and 3D video. The splitter can also support an IR channel, allowing you to control your equipment from anywhere you have an IR target set up, adding the most convenience out of using your splitter.The 2 way compact HDMI splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the Right Angle Nema 5-15 Male to 5-15 Female Power Adapter. It features a Right Angle Nema 5-15 Male connector on one side. And a Nema 5-15 Female connector on the other side. The adapter is rated for 15 amps at 120 volts. The adapter will allow you to change a standard Nema 5-15 power cable into a right angle cable. This can be very helpful in tight spaces where space is limited. The Right Angle Nema 5-15 Male to 5-15 Female Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the Left Angle Nema 5-15 Male to 5-20 Female Power Adapter. It features a Left Angle Nema 5-15 Male connector on one side. And a Nema 5-20 Female connector on the other side. The adapter is rated for 15 amps and at 125 volts. The adapter will allow you to connect a Nema 5-20 cable, frequently found on more heavy duty equipment like household appliances, into a standard 5-15 outlet. It is important to note, however, you should not exceed the voltage or amperage of the adapter. Please make sure to check the details of your equipment before use. It will also change your power cable from a standard orientation into a left angle cable. Which can be very helpful in tight spaces where space is limited. The Left Angle Nema 5-15 Male to 5-20 Female Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 4 way S-video and composite RCA splitter and amplifier. It features a DC jack and 5 sets of composite RCA and S-video jacks, one input and four outputs, on one side. As well as an included power supply. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. With a built in amplifier, the splitter is capable of supplying enough signal for cable runs up to 150 FT. It also includes mounting points for installing in a rack, panel or wall to maintain a clean, professional appearance. The 4 way S-video and composite RCA splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the Right Angle Nema 5-15 Male to 5-20 Female Power Adapter. It features a Right Angle Nema 5-15 Male connector on one side. And a Nema 5-20 Female connector on the other side. The adapter is rated for 15 amps and at 125 volts. The adapter will allow you to connect a Nema 5-20 cable, frequently found on more heavy duty equipment like household appliances, into a standard 5-15 outlet. It is important to note, however, you should not exceed the voltage or amperage of the adapter. Please make sure to check the details of your equipment before use. It will also change your power cable from a standard orientation into a right angle cable. Which can be very helpful in tight spaces where space is limited. The Right Angle Nema 5-15 Male to 5-20 Female Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the 2 way S-video splitter. It features a DC jack and an S-video female connector on one side. And two S-video female connectors on the other side. As well as an included power supply and 3 FT S-video cable. The splitter will allow you to send your signal from one source to multiple displays. Perfect for projecting your image on various screens. As a side-note: Splitters can often be confused with a switch. For more information on the difference between the two, please watch our video linked in the description below: The splitter can support resolutions up to 800x600 with no loss of signal. The 2 way S-video splitter is a quick and easy solution for your video projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the AC to DC Power Supply. It features an AC power supply on one side. And a 2.1mm ID/5.5mm OD DC Plug on the other side. The adapter is rated for 2 amps at 5 volts. The adapter will allow you to operate your device or charge the battery from electrical power outlets. The AC to DC Power Supply is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.