Belden 7916A - RG6 Quad Shield PVC Coax
RG6 | 18 AWG | 75 Ohm | Solid Bare Copper Conductor | Gas-injected FPE Insulation | Quad Shield | CM Rated PVC Jacket
Belden 7916A type RG6 is commonly used for digital HDTV, CATV, DBS, Broadband, Cable modems, and outdoor TV antennas installations. This cable features a UL listed CM Rated PVC jacket. Internally this cable is protected from RFI and EMI interference by a Duobond® IV quad shield (60% and 40% coverage). Quad shield cable is far superior at rejecting interference and should be used in high EMI/RFI environments. The center conductor is sweep tested from 3 MHz to 5 GHz and is made from 18 AWG solid bare copper. This bulk cable comes in a high-quality, easy pull box and can be measured and cut to exact distances. RG6 is commonly terminated with an F-Type, BNC, or RCA connector.
Features:
- 75 Ohm
- 18 AWG Solid Bare Copper Conductor
- Duobond® Quad Shield
- 100% Foil Tape and 60% Braid + 100% Foil Tape and 40% Braid
- PVC Jacket
- CM Rated
- UL Listed
- Sweep-Tested from 5 MHz to 3 GHz.
- Professional Grade
- Digital and Analog Applications
- HDTV, DBS, Broadband CATV, Cable Modem
- U/V Inhibitor
- Foot Markings
- Max Continuous Length: 1000 Feet
Please note:Â All products that are bought per foot are non-returnable.
Any amount of cable you order above the maximum continuous length of 1000 FT will be sent in separate pieces.
