Belden 1694WB - RG6/U Flooded Low-Loss Precision Coax Cable
RG6 | 18 AWG | 75 Ohm | Solid Bare Copper Conductor | FHDPE Insulation | Dual Shields | Waterblocking Grease | PE Jacket
Belden 1694WB type RG6 is commonly used for digital HDTV, CATV, HD-SDI, satellite television, and outdoor TV antennas installations. This cable features an outdoor rated polyethylene jacket. Internally this cable is protected from RFI and EMI interference by a 100% Duofoil® tape shield and 95% tinned copper braided shield. The center conductor is sweep tested from 5 MHz to 4.5 GHz and is made from 18 AWG solid bare copper. RG6 is commonly terminated with an F-Type, BNC, or RCA connector.
Features:
- 75 Ohm
- 18 AWG Solid Bare Copper Conductor
- Duofoil® 100% Tape Shield + 95% Tinned Copper Braid
- FHDPE (Foam High Density Polyethylene) Insulation
- Outdoor Polyethylene (PE) Jacket
- Waterblocking Grease
- Sweep-Tested from 5 MHz to 4.5 GHz
- Professional Grade
- Low Loss Serial Digital Coax
- Suitable for HD-SDI
- Foot Markings
- Sold per foot
- Max Continuous Length: 1000 FT
Please note: All products that are bought per foot are non-returnable.
Any amount of cable you order above the maximum continuous length of 1000 FT will be sent in separate pieces.
