16 AWG - Multi-Conductor - 600V - Stranded Conductor - Shielded - VNTC Tray Cable
VNTC tray cable is a sturdy and adaptable cable suitable for transmitting power, control, relay or other types of signals in wet, dry or hazardous environments. It is most commonly used for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. It is the preferred cable for factory or commercial applications.
VNTC tray cable can be installed in various types of conduit, ducts, raceways, and cable tray systems. It is flame retardant, sunlight resistant, burial rated, chemical and oil resistant and can be used in hazardous environments. It is rated to transmit 600v and has a temperature rating of 167° for wet applications and 194° in dry applications. It is also great for cold weather installations, being rated for both cold bend and cold impact resistance. This cable is suitable for use where shielding is required to reduce electromagnetic interference (EMI).
VNTC tray cable is a rugged cable used for wiring your mission-critical equipment, machinery, and systems.
Features
- VNTC (Vinyl Nylon Tray Cable)
- Stranded
- Bare Copper
- 600V
- Shielded (Foil Shield Al Mylar)
- UV Resistant PVC Jacket
- Color Code: ICEA METHOD 1 - TABLE E2 (see Resources Tab)
- UL Listed
Applications
- Power and Control
- Telemetering
- Relay Control
- Traffic Control
- Switching
- Lighting and Signal Transmission
Resources Tab
ICEA METHOD 1 - E2 TABLE
CONDUCTOR NUMBER |
INSULATION COLOR |
STRIPE |
CONDUCTOR NUMBER |
INSULATION COLOR |
STRIPE |
1 |
Black |
– |
19 |
Orange |
Blue |
2 |
Red |
– |
20 |
Yellow |
Blue |
3 |
Blue |
– |
21 |
Brown |
Blue |
4 |
Orange |
– |
22 |
Black |
Orange |
5 |
Yellow |
– |
23 |
Red |
Orange |
6 |
Brown |
– |
24 |
Blue |
Orange |
7 |
Red |
Black |
25 |
Yellow |
Orange |
8 |
Blue |
Black |
26 |
Brown |
Orange |
9 |
Orange |
Black |
27 |
Black |
Yellow |
10 |
Yellow |
Black |
28 |
Red |
Yellow |
11 |
Brown |
Black |
29 |
Blue |
Yellow |
12 |
Black |
Red |
30 |
Orange |
Yellow |
13 |
Blue |
Red |
31 |
Brown |
Yellow |
14 |
Orange |
Red |
32 |
Black |
Brown |
15 |
Yellow |
Red |
33 |
Red |
Brown |
16 |
Brown |
Red |
34 |
Blue |
Brown |
17 |
Black |
Blue |
35 |
Orange |
Brown |
18 |
Red |
Blue |
36 |
Yellow |
Brown |
Technical Specs
CONDUCTORS: Class B stranded bare copper per UL 83 and 62.
INSULATION: Polyvinyl Chloride (PVC) per UL 62 for Type TFFN (16 AWG) or UL 83 for Type THWN or THHN wire, nominal thickness is 15 mils
INSULATION JACKET: Each insulated conductor is jacketed with nylon meeting UL 62 for Type TFFN or UL 83 for Type THWN or THHN wire, minimum thickness is 4 mils
COLOR CODE: ICEA Method 1, Table E-2 (formerly K-2).
ASSEMBLY: Conductors are cabled with fillers where necessary to make round
SHIELD: Aluminum/Mylar helically applied with tinned copper drain wire
OVERALL JACKET: Sunlight resistant polyvinyl chloride (PVC) per UL 1277.
STANDARDS: Meets UL 1277 requirements for Type TC cables having THWN or THHN (TFFN) conductors, cables are listed for direct burial and meet the IEEE 1202, IEE 383 and UL 1685. 70,000 Btu/hr flame tests
AMPACITY: Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30°C per NEC Table 310.16, the values have been derated where applicable
TEMPERATURE: 90C
VOLTAGE: 600V
**May be used in Class I, Div. 2 and Class II, Div. 2 Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art 336 "Power and Control Tray Cable." **